Laserfiche WebLink
Form 33#TCI <br />I <br />Installation Instructions <br />_ / BUSHING <br />1. Drill 11/16° hole in desired spot on cowl <br />or fender. 2. Attach lead nut to"?coupling tube. <br />3. Loosen top nut and flat nut, raise swivel <br />cap, insulator and gasket to let swivel <br />bracket be turned to a vertical position <br />as illustrated in Fig. (A). <br />4. Feed lead and swivel Bracket through the <br />11/16° hole from the top. <br />5. Be sure swivel bracket rests on ears in <br />horizontal position before continuing. (See <br />Figure B). <br />6. Put back gasket, insulator, swivel cap and <br />flat nut. Be sure antenna is in desired <br />position, then tighten flat nut. <br />7. Now bring down top nut. Be sure that <br />rubber bushing stays in place. <br />8. Complete assembly as shown in Fig. (B). <br />DO NOT TIGHTEN HARDWARE EXCESSIVELY <br />UBE <br />E-•RUBBER BUSNING <br />Fig. A <br />FIg. B <br />FOR LONGER LIFB, PRESHRVE THE APPEARANCE OF YOUR <br />ANTENNA BY OCCASIONALLY USING A GOOD METAL POLISH <br />r <br />. `' <br />r ! •