2001-096 Resolution - Laserfiche WebLink

Home Browse Search

Specifications for each cab door. LiQhting shall be designed to provide illumination on areas under the dnver, officer, and crew cab riding area exits, which shall be activated automatically when the exif doors are opened, by the door jarn swiich and by the same means as the vodv perimeter Ii ahts. ? The lighting shall be capable of providing illumination at a minimum level of one (1) foot- candle on around areas within 30.00" of the edae of the apparatus in areas which personnel climb in or out of the apparatus or descend from the apparatus to the ground level. PERIMETER SCENE LIGHTS. B4DY There shall be a total of four (4) Truck-Lite, model 40003, 4.00" grommet mount weatherproof li?hts provided on the apparatus. Two (2) lights s11a11 be provided under the rea: step area and two (2) Iights shall be provided under the pump panel runizina boards. The? Iiahts shall be spaced one (1) each side of apparatus and have a clear lens. The perizneter scene Iiahts shall be activated b_y a parlcing bralce. Tiie lighting shall be capable of providing illumination at a minimum level of one (1) foot- candle on ?round areas within 30.00" of the edge of the apparatus in areas desianed for personnel to clunb onto the apparatus or descend from the apparatus to the around level. DECK LIGIiTS Two (? )-6.00" L'nitv AG deck lights with swivel mount shall be provided at the rear of the hose bed, one (I ) each side. One (1) IiQht shall be furnished with a 160,000 candle power halogen spot bulb and the other shall be furnished with a 6;000 candle power halogen flood bulb. HAND HELD SPOTLIGHT There shall be one (11) spotlight proeided, model Collins CL-12 witil a 9 foot coil cord and momentarv switch. The housinc, shall be made from aircraft aluzninum that is black powder coated. Locaiion of theone (1) spotlight shall be located on the offieers side of t1le engine housina matchina job #11937 in a stainless steel sIide-in bracket. HAND HELD LIGHT There shall be provided, Streamliaht LiteBox with the oranae thermoplastic bodv. The Streamlight LiteBox shall bemounted one in the front and four in the rear of the cab per NOFD dii-ections at pre construction. AIR HOR'! S1'STEM Two (2) Grover air horns shall be provided and located, in the front bumper, recessed one eaeh side. The horn system shall be piped to the air brake svstem 'xet tanlt utilizin? .38" tubing. A pressure protection valve shall be installed in-line to prevent the loss of air, in the air bralce system. AIR HOR.N CONTROL The air hoins shall be actuated per NOFD instructions at pre build. The driver shall have the Bidder Complies Yes I No Page 62