Laserfiche WebLink
SECTION 07210 <br />BUILDING INSULATION <br />PART 1 -- GENERAL <br />1.01 THE REQUIREMENT <br />A. Furnish labor, materials, equipment and appliances required for complete execution of Work <br />as shown on Drawings and specified herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 03300 - Cast -in -Place Concrete <br />B. Section 04200 - Unit Masonry <br />1.03 REFERENCE SPECIFICATIONS, CODES AND STANDARDS <br />A. Without limiting the generality of these specifications Work shall conform to applicable <br />requirements of the following documents: <br />1. HH -1-526C Insulation Board, Thermal (Mineral Fiber). <br />2. HH -1-1972/1 Insulation Board, Thermal, Polyurethane or Polyisocyanurate, Faced with <br />Aluminum Foil On one side. <br />3. TT -S-001657 Sealing Compound Single Component, Butyl Rubber Based, Solvent Release <br />Type (For Buildings and other Types of Construction). <br />1.04 SUBMITTALS <br />A. In accordance with the procedures and requirements set forth in Section 01300 - Submittals, <br />submit the following: <br />1. Manufacturer's literature, specifications, installation instructions, technical data, and general <br />recommendations. <br />2. Samples of each type of insulation specified. <br />1.05 DELIVERY, STORAGE AND HANDLING <br />A. Deliver materials in unopened, undamaged original packaging with bearing the <br />manufacturer's name. <br />B. Store materials in clean, dry, protected areas. Do not leave materials exposed to the <br />weather or sunlight, except to the extent necessary to perform the work. <br />022212BR <br />30048-005: 5/30/2092 07210-2 North Olmsted Phase 2 <br />C. Protect against ignition. <br />PART 2 -- PRODUCTS <br />2.01 ACCEPTABLE MANUFACTURERS <br />A. Subject to compliance with the requirements, provide products as manufactured by the <br />following: <br />1. Manufacturers of Extruded Polystyrene Board Insulation <br />a. Amoco Foam Products Company <br />b. Dow Chemical U.S.A. <br />c. UC Industries <br />2. Manufacturers of Polyisocya n u rate Foam Insulation <br />a. Apache Products Company. <br />b. Atlas Energy Products. <br />c. The Celotex Corporation. <br />3. Manufacturers of Sprayed Polyurethane Foam: <br />a. Demilec LLC <br />b. BASF <br />