Laserfiche WebLink
EXHIBIT B: NEW CHAPTER 927 <br />(4) General clearing activities not related to construction. If such activities disturb <br />one (1) acre or more, or are part of a larger common plan of development or sale <br />disturbing one (1) acre or more, compliance with the Ohio EPA Construction Site <br />General Permit and a full SWP3 are required. <br />(c) Activities disturbing 1/10 (one tenth) or less of an acre are not required to submit a SWP3 <br />or an Abbreviated SWP3, unless required by the City Engineer. "These activities must <br />comply with all other provisions of this regulation. <br />927.06 APPLICATION PROCEDURES <br />(a) SOIL DISTURBING ACTIVITIES SUBMITTING A STORMWATER POLLUTION <br />PREVENTION PLAN (SWP3): The applicant shall submit the SWP3 and the applicable <br />fees to the City of North Olmsted: <br />(1) For subdivisions: After the approval of the preliminary plans and with submittal <br />of the improvement plans. <br />(2) For other construction projects: Before issuance of a permit by the City. <br />(3) For general clearing projects: Prior to issuance of a permit by the City. <br />(b) SOIL DISTURBING ACTIVITIES SUBMITTING AN ABBREVIATED <br />STORMWATER POLLUTION PREVENTION PLAN (SWP3): The applicant shall <br />submit the Abbreviated SWP3 and the applicable fees to the City of North Olmsted: <br />(1) For single-family home construction: Before issuance of a permit by the City. <br />(2) For other construction projects: Before issuance of a permit by the City. <br />(3) For general clearing projects: Prior to issuance of a permit by the City. <br />(c) The City Engineer shall review the plans submitted under 927.06 (a) or (b) for <br />conformance with this regulation and approve, or return for revisions with comments and <br />recommendations for revisions. A plan rejected because of deficiencies shall receive a <br />narrative report stating specific problems and the procedures for filing a revised plan. <br />(d) Soil disturbing activities shall not begin and permits shall not be issued without <br />(1) Approved SWP3 or Abbreviated SWP3 <br />(2) Installation of erosion and sediment controls <br />(3) Physical marking in the field of protected areas or critical areas, including <br />wetlands and riparian areas <br />(e) SWP3 for individual sublots in a subdivision will not be approved unless the larger <br />common plan of development or sale containing the sublot is in compliance with this <br />regulation. <br />