2016-096 Ordinance - Laserfiche WebLink

Home Browse Search

EXHIBIT B: NEW CHAPTER 927 included in the report and approved by the City Engineer shall be incorporated in the grading plans and/or other specifications for site development. A. Data regarding the nature, distribution, strength, and erodibility of existing soils. B. If applicable, data regarding the nature, distribution, strength, and erodibility of the soil to be placed on the site. C. Conclusions and recommendations for grading procedures. D. Conclusions and recommended designs for interim soil stabilization devices and measures, and for permanent soil stabilization after construction is completed. E. Design criteria for corrective measures when necessary. F. Opinions and recommendations covering the stability of the site. 927.09 PERFORMANCE STANDARDS The SWP3 must contain a description of the controls appropriate for each construction operation and the applicant must implement such controls. The SWP3 must clearly describe for each major construction activity the appropriate control measures; the general sequence during the construction process under which the measures will be implemented; and the contractor responsible for implementation (e.g., contractor A will clear land and install perimeter controls and contractor B will maintain perimeter controls until final stabilization). The approved SWP3, and the sediment and erosion controls, and non -sediment pollution controls contained therein, shall be implemented upon the commencement of construction. Perimeter controls must be installed two working days prior to commencement of construction. The approved plan must be implemented until the site reaches final stabilization. All properties adjacent to the site of soil -disturbing activity shall be protected from soil erosion and sediment run-off and damage, including, but not limited to, private properties, natural and artificial waterways, wetlands, storm sewers and public lands. It is the owner's responsibility to maintain current records of contractor(s) responsible for implementing the SWP3 and providing that information to the City Engineer. The SWP3 shall identify all subcontractors engaged in activities that could impact stormwater runoff. The SWP3 shall contain signatures from all of the identified subcontractors indicating that they have been informed and understand their roles and responsibilities in complying with the SWP3. The applicant shall review the SWP3 with the primary contractor prior to commencement of construction activities and keep a SWP3 training log to demonstrate that this review had occurred.