|
Base Sales Build Document
<br />2130.0051 1 (Cross-over relief /cushion valve, specify port size and relief pressure
<br />2200.0151 1 lin cab dual axis air
<br />2200.070 4 Remote valve air control shift mechanism installed on above M4 va
<br />(per each air controlled section)
<br />2200.080 2 Remote valve air control kit: includes one NON-LOCKING in cab air
<br />controller; air line(s); and necessary fittings (per each)
<br />2200,085 2 Remote valve air control kit: includes one NEUTRAL -LOCKING in u
<br />air controller; air line(s); and necessary fittings (per each)
<br />on frontsnow plow drive frame to protect snow
<br />,er anale circuit
<br />Control console for air control levers and CS550 Rexroth
<br />spreader control head
<br />Installed on hoist, jib, plow lift, and plow angle sections
<br />In cab air lever controls for snow plow raise/lower and
<br />snowplow angle left/right functions
<br />In cab airshift controller, neutral locking for hooklift hoist
<br />controls i.e. (1) hoist up/down and (1) jib in/out
<br />2200.095 1 1 Remote valve air control accessories kit: includes tractor protection Required air control system accessory kit
<br />valve; adjustable air filter/regulator/lubricator, and air supply line kit
<br />(only one kit fired
<br />2250.035 1 Additional sensor extensioncable, 30 foot, for ground speed, auger Prewet flow meter connection cable (spreader side)
<br />feedback, or Flow meter feedback, etc.
<br />2250.053 1 Remote pause / blast switch and 30 foot cable Hydraulic System Component- Remote pause and blast
<br />2250.200 1 Electronic spreader controller for spinner, conveyor and liquid; Hydraulic System Component- CS550 in cab electronic
<br />features include groundspeed proportional operation of granular spreader and liquid systems controller, mounted
<br />conveyor/auger delivery systems, prewet and/or 3 lane anti -icing,
<br />touch screen fully programmable functions, multiple digital and analog to dual axis air controller stand
<br />inputs, data logging with report generating capabilities, gaps / WI -FI
<br />compatible interface, Bosch Rexroth CS-550/CS660 or equal
<br />' includes setup for installing the RC module in the valve enclosure, if
<br />different configuration is required see below for additional extension
<br />2250.205
<br />4 Additional sensor extension cable, 9ft long with one LED 90 degree
<br />Hydraulic System Component -Required CS550 spreader
<br />end, for ground speed, auger feedback, or Flow meter feedback, etc.
<br />controller wiring/wiring harnesses
<br />2250.215
<br />2 Additional sensor extension cable, 30ft long with one LED 90 degree
<br />Hydraulic System Component -Required CS550 spreader
<br />end, for ground speed, auger feedback, or Flow meter feedback, etc.
<br />controller wiring/wiring harnesses
<br />2250.230
<br />1 Additional sensor extension cable, 30ft long with straight ends, for
<br />Hydraulic System Component -Required CS550 spreader
<br />ground speed, auger feedback, or Flow meter feedback, etc.
<br />controller wiring/wirigg wiring/wiringharnesses
<br />2250.280
<br />4 Additional valve extension cable, 15ft long, for auger, spinner, pre -wet,
<br />Hydraulic System Component- Required CS550 spreader
<br />anti ice, etc.
<br />controller wiring/wirigg wiring/wiringharnesses
<br />2250.300
<br />1 Speed sensor pullup resistor
<br />Hydraulic System Component -Required CS550 spreader
<br />controller wiring1wiring harnesses
<br />2250.310
<br />3 Adaptor cable, C4 male to DIN, for adapting to DIN valve connections,
<br />Hydraulic System Component -Required CS550 spreader
<br />lane valve outputs, etc.
<br />controller wiring1wiring harnesses
<br />2250.390
<br />1 CS -550 sensor and interface cable for hydraulic pressure and
<br />Hydraulic System Component -Required CS550 spreader
<br />temperature with auxiliary inputs
<br />controller wiring/wiring harnesses
<br />73787 North Olmsted 2021_22 SA Hooklift 4115/2021 Page 3 of 9
<br />
|