Laserfiche WebLink
Quote # Q000000010034 July 25, 2025 Page: 4 <br />Option QTY Description <br />2000-0010 1 DOOR HANDLES <br />Install Tri-Mark free floating style door handles with pre -stretched stainless steel cables. <br />Include three piece interior door panels on all access doors. <br />3000-3833 1 DOOR HANDLES, INTERIOR ENTRY DOOR HANDLES TOP OF DOORS <br />Install Tri-Mark free floating style door handles with pre -stretched stainless steel <br />cables, Include three piece interior door panels on all access doors. The interior rear <br />and side entry door handles shall be located at the top of the door panels. <br />SR00328310 1 INTERIOR DOOR HANDLES - KEEP SIDE ENTRY DOOR STD LOCATION <br />2000-0814 1 <br />VI -TECH MOUNTING, FREIGHTLINER <br />Install standard Vi-Tech body mounts. <br />2000-0270 1 <br />MIRROR STAINLESS STEEL SPLASH SHIELDS <br />Install #8 mirror stainless splash shields on the tower front face of the body just behind the cab <br />access doors. These splash shields are to be the same height as the diamond plate front corner <br />guards. <br />2000-0596 1 <br />PRE PUNCH SPLASH SHIELDS <br />The specified front splash shields are to be pre -punched to accept the specified running board <br />tights. <br />2000-0689 1 <br />FENDERS, STAINLESS, STD, SS 3" DROP SKIRT <br />Install a stainless steel fender, for use in conjunction with a 3" drop skirt, at the <br />streetside rear wheelwelt location. <br />2000-0690 1 <br />FENDERS, STAINLESS, STD, CS 6" DROP SKIRT <br />Install a stainless steelfender, for use in conjunction with a 6" drop skirt, at the <br />curbside rearwheelwell location. <br />2000-0220 1 <br />POLISHED STAINLESS RUB RAILS, LIGHTED <br />Install polished stainless steel tower body rub rails. Rails are to include cutouts for <br />strip lighting. <br />2000-0652 1 <br />STANDARD CORNER GUARDS <br />Install standard height polished diamonciptate corner guards. <br />2000-0806 1 <br />ACCESS STEP, ZIAMATIC, 6" DROP SKIRT <br />install a Zico automatic fold -out step beneath the side access door. Note that the <br />I <br />override switch, if required, will be noted under the 'electrical' section. Note: 6" drop <br />skirt on this vehicle. <br />2000-0281 1 <br />REAR DOOR HOLD OPENS, GRABBER <br />Install chrome Cast Products "Grabber" style rear door hold opens. (NOTE: HOLDOPENS MUST <br />BE RELOCATED IF TELESCOPIC LIGHTS ARE ORDERED) <br />2000-0583 1 <br />ENTRY DOOR THRESHOLDS, LINE-X <br />Apply black Line-X to the side and rear entry door thresholds. Delete the standard anti - <br />stip tape. <br />2000-0584 1 <br />REAR RISER ADP <br />The rear riser is to be fabricated out of polished aluminum diamondplate. <br />2000-0687 1 <br />LICENSE PLATE, CENTER REAR RISER <br />Drill two mounting holes for the rear license plate centered in the rear riser. Install an <br />Spec Writer: <br />Spec Designer: <br />NORTH OLMSTED FIRE DEPARTMENT <br />