2025-091 Ordinance - Laserfiche WebLink

Home Browse Search

Quote # QUO0000010034 July 25, 2025 Nigo 21 Option QTY Description Install a Whalen M9EZ L.E.D. side scene light with chrome flange on the upper curbside rear portion of the body. 3200-0786 1 M9EZ SERIES LED LOAD LIGHTS, REAR OF MODULE Install (2) Whalen M9EZ L.E.D scene lights with chrome flanges on the upper portion of the rear module face to function as load lights. SR00290531 1 REAR LOAD LIGHTS - M6ZC Supply and install (2) M6ZC load lights above rear doors per drawings 3000-1753 1 RED/AMBER WARNING, TOP, SIDE ACCESS DOOR Install a Tecniq red/amber split L.E.D. light strip on the upper curbside access door inner panel. Installation will be near flush with the inner door panel. The light strip is to flash (alternate colors) when the access door is open, and the emergency lighting is activated. 3000-1763 1 RED/AMBER WARNING, BOTTOM, SIDE ACCESS DOOR Install a Tecniq red/amber split L.E.D. light strip on the lower curbside access door inner panel. Installation will be nearftush with the inner door panel. The light strip is to flash (alternate colors) when the access door is open, and the emergency lighting is activated. 3000-1758 1 RED/AMBER WARNING, TOP, REAR ACCESS DOORS Install Tecniq red/amber split L.E.Q. light strips on the upper rear module access door inner panels, one (1) per door. Installation will be near flush with the inner door panels. The light strips are to flash (alternate colors) when the access doors are open, and the emergency lighting is activated. 3000-1768 1 RED/AMBER WARNING, BOTTOM, REAR ACCESS DOORS Install Tecniq red/amber split L.E.D. light strips on the lower rear module access door inner panels, one (1) per door. Installation will be near flush with the inner door panels. The tight strips are to flash (alternate colors) when the access doors are open, and the emergency lighting is activated. 3000-0252 1 TECNIQ E10 LED GROUND LIGHTING (7) Tecniq El lights will be installed in OEM stainless mounting brackets. Locations are as follows: (2) on each module side, (1) below each chassis running board and (1) centered below the rear bumper. The lighting is to function as follows: A. Includes a front console panel switch. B. Compartment doors activate the lights in the respective quadrant of the body. Rear entry doors activate the rear corner lights. C. Rear lights are wired reverse activated. All Lights to activate for 15 seconds when the vehicle is placed in drive. D. Items b. thru d. are to only Occur when the parking or hoadlights aro activatod. SR00290543 1 GROUND LIGHT - PROGRAMMING Activate 8Ut0m0tically when truck is put in park (irreg<.lydloss if hoadlights are on) - lights to remain on until placed in drive. Spec Writer: Spec Designer: NORTH OLMSTED FIRE DEPARTMENT