Laserfiche WebLink
Quote # Q000000010034 July 25, 2025 Pag " 24 <br />Option QTY Description <br />to normal operation. <br />3000-0414 1 ELECTRICAL SYSTEM. <br />Install the Power -Tech by Horton electrical system. <br />SR00290548 1 FRONT CONTROL PANEL BUTTON LAYOUT <br />Front control panel button layout to match previous truck 20483 (18493) <br />3000-0439 1 ADDITIONAL PANEL, SURFACE MOUNT, ANGLED WITH OULET <br />Install a second rear Power -Tech by Horton control panel angled on the wall near the <br />head of the bench. The housing is to include a place for an 02 outlet. Note: 02 outlet is <br />selected separately. <br />3000-3015 1 WIRING, RECESSED AUXILIARY CONDENSER <br />Install wiring and Eco Smart fan control module for use with CoolTech unit. Solar panel <br />wiring is to be included on CoolTech II units. <br />3000-0316 1 ANGLED HOUSING, FRONT MODULE FACE DRIVER SIDE FOR SHORELINE/S AND <br />INDICATOR PANELS IF ORDERED. <br />An angled housing shall be installed on the driver side of the front module face. The <br />housing shall provide an installation location for shoreline/s and indicator panels if <br />ordered. The housing is to be painted to match the module. <br />3000-0305 1 INPOWER BATTERY SWITCH, WITH WAKE BUTTON 5 min. <br />Install an Inpower electronic battery switch. Switch is to activate battery power through the <br />vehicle ignition and is to include an automatic shutdown tinier to deactivate battery power after <br />the ignition is turned off. To include a wake button installed on the front console to activate the <br />electrical system without using the key. <br />3000-1513 1 LIFESINE INVERTER/CHARGER, ON DEMAND <br />Install a Vanner #LSC12-1100 LifeSine Inverter/charger in the dedicated electrical <br />compartment as noted. Unit is to function 'on demand'. Status panels are selected <br />separately. <br />3000-2151 1 VANNER CHARGER/STATUS PANEL <br />Install a Vanner charger/status panel in standard locations. <br />3000-0310 4 110V INTERIOR OUTLET 2 FWD INHALATION AREA, 1 ABOVE CRASH BARRIER, 1 <br />CRASH BARRIER COMPARTMENT - SURFACE MOUNT ON BENCH SIDE WALL <br />Install a 110V outlet(s) as noted. <br />3000-0544 3 INTERIOR 12VDC OUTLETS: CL TYPE/USB-A/USB-C 1 FWD INHALTION AREA, 1 <br />ABOVE CRASH BARRIER, 1 CAB CONSOLE <br />Install a 12VDC cigarette style outlet with USB-A and USB-C outlet(s) as noted. Wire <br />battery hot. <br />3000-1462 1 SHORELINE 1, 20A SUPER AUTO EJECT, RED <br />Mount a Kussmaul Super Auto Eject 20 amp shoreline inlet in the standard location. <br />Cover is to be red. <br />3000-1500 1 PD BOX LOCATION, LEFT NAND SIDE, SS INT. COMPARTMENT <br />Install the power distribution panel on the left hand side of the streetside intermediate <br />compartment. Close off this area from the remainder of the compartment. <br />Spec Writer: <br />Spec Designer: NORTH OLMSTED FIRE DEPARTMENT <br />