53-98 Lakewood Schools PIP - Laserfiche WebLink

Home Browse Search

1161.03 ACCESSO,~Y PARKING (a) (1) (2) (3) the proposed parking lot conforms to the design requirements set forth in Chapter 1325 of the Buitding Code and has been approved by the Architectural Board of Review. shall be and the same is hereby amended to read as follows: 1161.03 ACCESSORY PARKING (a) (1) (2) (3) the proposed parking lot conforms to the design requirements set forth in Chapter 1325 of the Building Code and has been approved by the Architectural Board of Review prior to the demolition of any existing single, two-or three-family dwelling, in the R1 L, R1M, R1 H, R2, ML, MH and L zoning districts, on the proposed lot. In addition, if applicable, approval by the Commission for conditional use as accessory parking under this subsection must also be approved prior to the demolition of any existing single, two- or three-family dwelling on the proposed lot. If such lot is substantially vacant due to demolition prior to the time of application for parking lot design approval and conditional use approval, the lot shall have been vacant for at least twenty-four (24) months preceding the application unless the Commission grants a waiver from such time requirement based on reasonable causes for such demolition by an owner, or prior owner, beyond his or her reasonable control, such as fire or other source of property damage or loss. Section 29. That the existing Section 1161.03(h) of the Codified Ordinances of the City of Lakewood, noTM reading respectively as follows: 1161.03 SUPPLEMENTAL REGULATIONS FOR SPECIFIC USES (h) Manufacturing. Processing~ Assembly. and Packaging Plant. In a C3 general business district, manufacturing, processing, assembly, and packaging plants may be permitted as conditionally permitted uses provided that: (1) there will be no emissions of odors, dust, smoke, gas, or fumes from the premises on which the proposed use is to be located; (2) there will be no vibrations or noise created by the proposed use which will be transmitted to abutting properties; (3) storage of raw materials, partially finished, or unfinished products ~hall be entirely within the principal structure; (4) the proposed use will not generate or cause a substantial increase of truck traffic; (S) no variances to the off-street parking requirements of Chapter 1143 are required; and (6) where necessary, an off-street loading and unloading area will be provided pursuant to Schedule t 143.05. shall be and the same is hereby amended to read as follows: 1161.03 SUPPLEMENTAL REGULATIONS FOR SPECIFIC USES (h) Manufacturing, Processing, Assembly, Packaging Plant anti Light Industrial. (1) In a C3 general business district, manufacturing, processing, assembly, and packaging plants may be permitted as conditionally permitted uses provided that: (A) there will be no emissions of odors, dust, smoke, gas, or fumes from the premises on which the proposed use is to be located; (B) there will be no vibrations or noise created by the proposed use which will be transmitted to abutting properties; 11