53-10 Amend Chapter 1329, Signs - Laserfiche WebLink

Home Browse Search

Proposed Ordinance 53-10. Substituted October 18, 2010. shall be removed on the issuance of a final occupancy permit or one year after the permit is issued, whichever date occurs first. (c) .Directional Signs. Two directional signs each not exceeding two square feet in area shall be permitted on any building or lot, but not less than five feet from any lot or street right-of-way line. (d) Identification Signs. One wall or ground identification sign not exceeding eight square feet shall be permitted, provided the wall sign is located on the street side of a multiple family, building and provided any ground sign located in front of the setback line has received approval from the Board of Building Standards. (e) Real Estate Signs. One temporary double face freestanding or wall sign advertising the sale, lease or rental of the premises or part of the premises on which the signs are displayed, not exceeding five square feet in area, shall be permitted for each lot. (f) Canopy Signs. One canopy sign shall be permitted. The total area of one face of the sign shall not exceed five square feet and the vertical dimension of the sign shall not exceed twelve inches and the lowest structural member shall not be less than eight feet from the sidewalk grade. (g) Awning Signs. Ohe awning sign shall be permitted. The total area of one face of the sign shall not exceed six square feet and the vertical dimension of the sign shall not exceed twelve inches. (Ord. 52-85. Passed 9-3-85.) (h) Billboard and Portable and Roof Signs. Billboards, portable signs and roof signs shall not be permitted in the ML and MH zoning districts unless permitted by specific provisions of this chapter. (Ord. 25-96. Passed 10-7-96.) 1329.09 SIGNS: COMMERCIAL, OFFICE Cl; COMMERCIAL, RETAIL C2; GENERAL BUSINESS C3 DISTRICTS. Accessory signs in the Commercial, Office Cl; Commercial, Retail C2; General Business C3 Districts be designed, erected, altered, moved and maintained, in whole or in part, in accordance with these regulations. (a) Functional Types Permitted. Business signs, development signs of a temporary nature, directional signs, identification signs, informational signs, nameplates, political signs, real estate signs, temporary signs, and bulletin boards on the lots of public or semipublic institutions. (b) Structural Types Permitted. Awning, canopy, ground, pole, wall and window signs. Projecting signs may be permitted if approved by the Board of Building Standards. (c) Maximum Area and Number Permitted. (1) Maximum sign face area. The maximum sign face area of all permanent signs permitted for each separate use occupying a building or unit of a building shall Page 8 of 28