28-14 Amend Chp. 1339 Storm Water Mgmt

Home Browse Search

(2) Proposed Development Plan. A drawing showing locations of: A. The larger common plan of development or sale; B. The development area; and C. All pertinent surrounding natural features within 200 feet of the development site including, but not limited to: (i) Water resources such as wetlands, springs, lakes, ponds, rivers and streams (including intermittent streams with a defined bed and bank); (ii) Conservation Easements; (iii) Other sensitive natural resources; (iv) The sensitive areas receiving rmroff from the development; and (v) All off -site utility installation areas that are related to the planned project. (3) Storm Water Pollution Prevention Plan (SWP3). The permittee must adhere to all requirements of the EPA Construction General Permit "SWP3 Require- ments" section. In addition, the following items shall also be shown on the SWP3 drawing: A. Drainage patterns during major phases of construction (multiple drawings may be needed); B. All off -site borrow or spoil areas; and C. The location of each proposed soil erosion and sediment control BMP, in- cluding at a minimum: (i) Permanent soil erosion control practices to be left in place after construction operations have been completed (e.g. level spreaders, permanent erosion control matting, gabions, rock lined channels, etc.); (ii) Areas likely to require temporary stabilization during the course of site de- velopment; (iii) Designated construction enhances where vehicles will access the construc- tion site; (iv) In- stream activities including stream crossings; (v) Areas designated for the storage or disposal of solid, sanitary and toxic wastes; (vi) Dumpsters; (vii) Concrete truck washout; (viii) Fuel tanks; 12