1975 016 Ordinance - Laserfiche WebLink

Home Browse Search

- 7- (b) Loading facilities shall not be located in a front yard or in a required side or rear yard. Of£-Street loading spaces shall be pro- vided with surface improvements as required for parking areas. Each required off-street loading space shall be designed for direct vehicular access by means of a driveway, or driveways, to a public street in a manner which will least interfere with trafPic movements and lane encroachment. The access shall be located so that the driveway center line shall be not less than 100 feet from the nearest intersecting street line. (c) Schedule of Requirements Loadin g spaces shall be provided in accordance with the following schedule: Gross Floor Area of Required Number of Building or Use Building Spaces Retail stores - all types 5,000 - 10,000 sq.ft. 1 10,000 - 40,000 sq.ft. 2 40,000 - 100,000 sq.ft. 3 each add'1 50,000 sq.ft. 1 add'1 space All manufacturing service and storage establishments Up to 40,000 sq.ft. 1 40,000 - 100,000 sq.ft. 2 ea. add'1 50,000 sq.ft. 1 add'1 space Section 31.16. Improvements to Parking and Loading Areas_ All parking areas and driveways shall be surfaced with asphaltic concrete or Portland cement concrete, or other similar hard surface as shall be approved by Council and be as approved by the Village Engineer. All parking areas and driveways shall provide adequate drainage so that all water is contained within the lot on which the parking area or driveway is located in such manner that water shall not drain across other private or public property. Portland Cement concrete or stone curbs at least six inches above the levels of the surface of the parking area and at least twelve inches below the sur- face shall be provided to define the limits of the parking area except at exits and entrances. Such curbs shall be at least six inches thick. Curbs shall be arranged so that no part of a parked vehicle shall project into that portion of a required yard in which off-street parking is prohibited. Planted islands shall be developed and distributed so as to interrupt the expanse of paved area. Such islands shall have a minimum dimension of 10 ft. The Conimission may require landscape features and a wall or a fence between a parking or loading area and a side or rear lot line of a Residential District. Parking spaces shall be defined by painted solid lines outlining the long sides of the space. I An approved barrier shall be provided to establish the limits o£ each parking area on each lot.