2009 021 Ordinance - Laserfiche WebLink

Home Browse Search

(e) The incinerator shall be installed in a location which has sufficient air for the proper and satisfactory combustian of gas and proper ventilation of the room'and it shall not be installed in a tightly closed room or small closet. (fl Gas pressure regulators shall be vented into the combustion chamber adjacent to a constant burning flame or into the flue pipe. (g) Flue pipes shaIi be the same size as the flue collar on the incinerator for the fufl distance to the chimney and must pitch up to the chimney at least one-half inc}i to the foot and shall be supported securely. The flue pipe must be cemented in the chunney and must not enter beyond the inner wall thereof; no other flue pipe shall be connected to such a flue pipe. (h) The area of the chimney or vent to which the incinerator is connected must be at ieast eyual to the aggregate areas of the appliance autlets connectec3 thereto: pjne Diameter (In Table of Flue ches)?qrea Sq In, P Pi en Areas jpe Diameter ( nches ) Area Sq.in. 3 7.1 8 50.4 4 12.6 9 63.8 5 19.7 . 10 78.5 6 28.3 11 95.5 7 38.5 12 113.0 (i) The gas line supplying the incinerator shall be of adequate size to supply the required amount of gas with a nomiuual pressure drop. All house lines and appliance connections shall be so constructed anci installed as to be durable, substantial and gastight, and shall be constructed of standard weight steel or wxought iron pipe and malleable iron tiueaded fittings or standard weight copper or brass pipe and threader copper or brass fittings. No semirigid or flexible connectors may be used, nor shall cast iron pipe or fittings be used. • (j) An approved valve and a grottnd joint or gasket union shall be placed between the outiet of the house line and the incineratar connection. Right and left couplings shall not be used on any house line or appliance connection. Cflmpression, flared, soldered or sweated fittings, shall not be used in any hause line. (k) No gas line shall be run in a chitnney or a heating or ventilating duct and if a house line must pass through a concrete floor slab it must be enclosed by a steel casing or thimble, (1) The gas line must not rest on any other pipe and must be rigidly supporced with pipe hooks, straps or hangers at proper intervals so that the line cannot be moved. (Ord. 715. Passed 11-21-60.) 1345.06 INCINERATOR PERMIT. No incinerator shall be installed without first making an application and obtaining a permit from the Building Commissioner. The fee for such permit shall be as provided in Chapter 1309. The application for the permit shall contain information as the Cammissianer shall prescribe and which will assist him in determining whether the proposed installation meets the requirements of this chapter. (Ord. 715. Passed 11-21-60.) , 1999 Repiacement