2016 025 Ordinance - Laserfiche WebLink

Home Browse Search

/~T CFfAGRI[3 Cf ~ RIVER WATERSHED PARTtdERS 1 Nfay 2016 3. BMPs that failed to operate as designed or proved inadequate for a particular location. 4. Where additional BMPs are needed that did not exist at the time of inspection. F. Corrective action required including any necessary changes to the SWP3 and implementation dates. (3) Discharge locations shall be inspected to determine whether erosion and sediment control measures are effective in preventing significant impacts to the receiving water resource or wetlands. (4) Locations where vehicles enter or exit the site shall be inspected for evidence of off-site vehicle tracking. (5) The applicant shall maintain for three (3) years following final stabilization the results of these inspections, the names and qualifications of personnel making the inspections, the dates of inspections, major observations relating to the implementation of the SWP3, a certification as to whether the facility is in compliance with the SWP3, and information on any incidents ofnon-compliance determined by these inspections. (i) MAINTENANCE. The SWP3 shall be designed to minimize maintenance requirements. All BMPs shall be maintained and repaired as needed to ensure continued performance of their intended function until final stabilization. All sediment control practices must be maintained in a functional condition until all up slope areas they control reach final stabilization. The applicant shall provide a description of maintenance procedures needed to ensure the continued performance of control practices and shall ensure a responsible party and adequate funding to conduct this maintenance, all as determined by the Village Engineer. When inspections reveal the need for repair, replacement, or installation of erosion and sediment control BMPs, the following procedures shall be followed: (1) When BMPs require repair or maintenance. If an internal inspection reveals that a BMP is in need of repair or maintenance, with the exception of a sediment- settling pond, it must be repaired or maintained within three (3) days of the inspection. Sediment settling ponds must be repaired or maintained within ten (10) days of the inspection. (2) When BMPs fail to provide their intended function. If an internal inspection reveals that a BMP fails to perform its intended function as detailed in the SWP3 and that another, more appropriate control practice is required, the SWP3 must be amended and the new control practice must be installed within three (3) to ten (10) days of the inspection as determined by the community engineer or site inspector. (3) When BMPs depicted on the SWP3 are not installed. If an internal inspection reveals that a BMP has not been implemented in accordance with the schedule, the control practice must be implemented within ten (10) days from the date of the inspection. If the internal inspection reveals that the planned control practice 23