Laserfiche WebLink
G <br />CITY OF NORTH OLMSTED ORDINANCE NO. 72-192 Page 3 <br />be and the same is hereby amended to read as follows: <br />215-2 CONDUCTOR SIZE <br />Feed conductors shall have a current rating not smaller than <br />the feeder load as determined by Section 220-4. A 2-wire <br />feeder supplying two or more 2-wire branch circuits, or a <br />3-wire feed supplying more than two, 2-wire branch circuits, <br />or two or more 3-wire branch circuits shall iae not smaller <br />than #10 wire A, W.G. except as follows: <br />In amulti-family dwelling each individual apartment of two <br />or more habitable rooms shall be provided with a feeder shed <br />in accordance with Article 220 of the National Electrical Code, <br />1971 edition, but in no case shall the feeder be smaller than <br />60 ampere, 3-wire. <br />Section 7. That Article 220, Section 220-2, Paragraph A now reading as <br />follows: <br />220-2 (a) GENERAL LIGHTING LOADS BY OCCUPANCIES <br />Type of Occupancy Unit Load per <br />Sq. Ft (Watts) <br />Armories and Auditoriums 1 <br />Banks 5 <br />Barber Shops and Beauty Parlors 3 <br />Churches 1 <br />Clubs 2 <br />Court Rooms 2 <br />=x Dwellings (Other than Hotels) 3 <br />Garages-Commercial (storage) 1/2 <br />Hospitals 2 <br />_ <br />Hotels and Motels, including apartment houses <br />without provisions for cooking by tenants <br />2 <br />Industrial Commercial (Loft) Buildings 2 <br />Lodge Rooms 1 1/2 <br />_ <br />Office Buildings 5 <br />_ <br />Restaurants 2 <br />Schools 3 <br />Stores 3 <br />Warehouses Storage 1/4 <br />In any of the above occupancies except single- <br />family dwellings and individual' apartments of <br />multifamily dwellings: <br />Assembly Halls ahd Auditoriums <br />Hall, Corridors, Closets <br />Storage Spaces <br /> <br />1 <br /> <br />1/2 <br />1/4 <br />~ All receptacle outlets of 15-ampere or less rating in single-family and <br />multi-family dwellings and in guest rooms of hotels and motel (ex- <br />cept those connected to the receptacle circuits specified in Section <br />220-3 (b) may be considered as outlets for general illumination, <br />and no additional load need be included for such outlets. <br />be and the same is hereby amended to read as follows: <br />