84-125 Ordinance - Laserfiche WebLink

Home Browse Search

CITY OF NORTH OLMSTED ORDINANCE N0. 84- 125 PAGE 4 (f) Design criteria governing profile grades, horizontal curves and cross sections shall be of sound engineering practice subject to approval by the City Engineer. (13) Sublots: (a) All sublots shall front on a public street. (b) The minimum frontage shall be determined at the right-of -way or the building setback line which ever requires the larger lot size. (c) Minimum frontage on a cul-de-sac shall be de*ermined at a curved line concentric with the cul-de-sac and :..ar more than 50 feet from the right-of-way line of the cul-de-sac. The measurement shall be along the chord. (d) Corner lots shall have a minimum of fifty foot (SO') setback on any street that the house fronts upon, and a minimum of twenty-five foot (25') setback for: the side yard requirements. Any setback shall be measured according to the standard established in Ordinance No. 62-33, Section 1125.60 and entitled "Setback". (e) Whenever practicable, side lot lines shall be straight lines perpendicular to the street or radial to the center line curvature. (f) No sublots, parcels or blocks without access to a public street shall be permitted. (g) Lots may not be sold until the City accepts the plat for record purposes only, (14) The City shall be provided with three (3) copies of th.e plat including the original. The School Board shall be provided with one (1) copy of the plat. 1000.07 Procedure for Minor Subdivision (a) Application. A sketch plan complying with the requirements set forth in Section 1000.08 shall be prepared for each minor subdivision and an appliCation for approval submitted to the office of the City Engineer not less than twelve (12) days grior to the next regularly scheduled meeting of the Planning Commission. The purposes of a sketch plan layout are to furnish sufficient information to determine if it qualifies as a minor subdivision, its relation to adjacent subdivisions and compliance with other City codes. (b) Review by City Engineer. The developer shall subrriit either a metes and bounds deed description or plat, as required to the City Engineer for review and, if it is found to conform to the approved sketch plan and is otherwise satisfactory, the City Engineer shall so certify the approval thereon within seven working days after such receipt. (c) Action by PlanninQ Corunission. The Planning Commission shall take action after receipt of an application with all required maps, sketches and information and the report of the City Engineer as to compliarce