Laserfiche WebLink
Specifications <br />CHASSIS <br />Chassis provided shall be a new. full tilt cab custom fire apparatus. The chassis shall be <br />manufactured in the apparatus body builder`s facility eliminatinc, any split responsibility. The <br />chassis shall be designed and manufactured for heaw-duty service; with adequate strength, <br />capacity for the intended load to be sustained, and the type of serviee required. The chassis <br />shall be themanufacturers first line tilt cab. <br />SEATING CAPACITY <br />The seating capacity in the cab shall be six (6) . <br />WHEELBASE <br />The wheelhase of the vehicle shall be no greater than 188.00". <br />GVW RATING <br />The gross vehicle weight rating shall be a minimum of 42,740 lbs. <br />FRAIVIE <br />The chassis fiame shall be built with two (2) steel channels bolted to six (6) cross members. <br />The side rails shall have a 13.38" tall web over the front and inid sections of the chassis, wit11 a <br />continuous smooth taper to a 10.75" over the rear axle. Each rail shall havea section modulus <br />of 25.992 in. sq., aud a resisting bending inoinent (rbm) of 2,859,122 inch pounds over the <br />critical regions of the frame assemblv, with a section modulus of 18.96 in. sq. with an rbm of <br />1.085,803 inch pounds over the rear aale. The fran-ie rails shall be constructed of 110,000 psi <br />vield strength heat treated .38" thick steel, with 3.50" wide flanges. <br />FRAME R4IL WARR4NTY <br />The frame rails shall be guaranteed for the Iife of the vehiele against defects in desigiz; <br />material or workmanship, excluding accident or abuse. A copy of the fire apparatus <br />tnanufacturer's wan-anty shall be included ?rith the bid. <br />FRONT AXLE <br />The front axle shall be a reverse "I" beam type «?ith inclined king pins. It shall be a MeritorTM <br />axle, Model FL-943, with a rated capacity of 18,740 pounds. <br />The turning angle shall be 45 degrees or greater. <br />A viewing window shall be provided on each side of the axle for checlcing the oil level. <br />FRO1!'T 4XLE WARRANTI' <br />The MeritorTM three (3) year parts and labor warranty shall be provided with this axle, plus <br />an additional two (2) years of parts only coverage. MeritorTM shall also provide a one (1) <br />vear parts and labor warranty for wheel seals. The seal warranty shall apply to our standard <br />MeritorTM wheel seals and shall not apply to another specified seal. If other seals are <br />specified, the warranty shall be parts only. <br />Bidder <br />Complies <br />Yes I No <br />Page 10