Laserfiche WebLink
such services. The Consultant shall be res nsible for the <br />performing Po <br />professional quality, technical accuracy, timely completion and coordination <br />of all services. <br />>~ e. The scope of services may be amended by mutual agreement. <br />f. If a dispute arises between the Consultant and the City regazding the contract <br />for services, the City and the Consultant shall negotiate in an attempt to resolve <br />the dispute. Should negotiations be unsuccessful, a mutually acceptable third <br />party may be engaged to mediate the dispute, with expenses equally shared <br />between the City and the Consultant. <br />2. SydSYipgeS.sCYiCffi: <br />~' a. Reseazch and procure all appropriate records and perform all field surveys to <br />establish the horizontal and vertical control and alignment for the proposed <br />~~ improvements. This shall include locating all improvements with respect to <br />adjacent property lines. <br />b. Obtain all pertinent information regarding the present conditions at the site <br />with respect to existing installation or other conditions relevant to the design. <br />3. P~-I?~.gign S~i~s~: <br />J <br />a. Coordination ofowner-supplied data, including Engineering Department <br />requirements. <br />b. Presentation to the City of preliminary concept plan, budget and schedule for <br />review. <br />4. I2r~tiug Ss°~: <br />a. Prepaze plan and detail sheets at appropriate scales on 24" x 36" sheets. All <br />survey points aze to be included on the drawing. Show all storm and sanitary <br />utilities in plan and profile. <br />b. All final plans will be reviewed by the City. Submit two (2) interim copies of <br />the plan sheets for review. <br />c. All design drawings and design details shall be done using an electronic <br />program which is compatible with the AutoCAD© Version 12 program. Hazd <br />copies of all design drawings and design details shall be submitted to the City <br />along with a diskette or diskettes, if necessary, formatted in AutoCAD© <br /> <br />