Laserfiche WebLink
<br />19. Sec. 901.3 Roofing covering mat„ (Am~1 Add the sentence: <br />Asphalt or fiberglass shingles shall be a minimum 20 year warranty and Class <br />C rating. <br />20. Sec. 910 Reroofing. (Amendedl Do not adopt the OBOA amendment to the <br />CABO code. <br />21. Sec. 1901.1 Materials („~ded~ and/or in conformity to SMACNA <br />standards and manufacturer's specifications. <br />22. Sec. 1902.5 Return air ducts. (Addedl. Turning vanes shall be installed in <br />duct elbows going to electronic air cleaners. <br />23. Sec. F-103-Requirements lAm .nriPr~l NOW APPENDIX D <br />F-103.1 Outdoor swimming pool: An outdoor swimming pool, including <br />an in-ground, above-ground or on-ground pool, shall be provided with a <br />barrier which shall comply with the following: <br />A. The top of the barrier shall be at a height above grade measured on <br />the side of the barrier which faces away from the swimming pool <br />consistent with the requirements expressed in the Zoning Code of <br />the City. The maximum vertical clearance between grade and the <br />bottom of the barrier shalt be 2 inches measured on the side of the <br />barrier which faces away from the swimming pool. Where the top <br />of the pool structure is above grade, such as anabove-ground pool, <br />the barrier may be at ground level, such as the pool structure, or <br />mounted on top of the pool structure. Where the barrier is mounted <br />on top of the pool structure, the maximum vertical clearance <br />between the top of the pool structure and the bottom of the barrier <br />shall be 4 inches, which in any event shall be consistent with the <br />provisions of the Zoning Code of the City. <br />B. Openings in the barrier shall not allow passage of a 4-inch diameter <br />sphere. <br />C. Solid barriers which do not have openings, such as a masonry or <br />stone wall, shall not contain indentations or protrusions except for <br />normal construction tolerances and tooled masonry joints. <br />D. Where the barrier is composed of horizontal and vertical members <br />and the distance between the tops of the horizontal members is less <br />than 45 inches, the horizontal member shall be located on the <br />swimming pool side of the fence. Spacing between vertical members <br />shall not exceed 1 3/4 inches in width. Where there are decorative <br />cutouts within vertical members, spacing within the cutouts shall not <br />exceed 1 3/4 inches in width. <br />E. Where the barrier is composed of horizontal and vertical members <br />and the distance between the tops of the horizontal members is 45 <br /> <br />