Laserfiche WebLink
SECTION 07210 <br /> BUILDING INSULATION <br /> PART 1 -- GENERAL <br /> 1.01 THE REQUIREMENT <br /> A. Furnish labor, materials, equipment and appliances required for complete execution of Work <br /> as shown on Drawings and specified herein. <br /> 1.02 RELATED WORK SPECIFIED ELSEWHERE <br /> A. Section 03300 - Cast-in-Place Concrete <br /> B. Section 04200 - Unit Masonry <br /> 1.03 REFERENCE SPECIFICATIONS, CODES AND STANDARDS <br /> A. Without limiting the generality of these specifications Work shall conform to applicable <br /> requirements of the following documents: <br /> 1. HH-I-526C Insulation Board, Thermal (Mineral Fiber). <br /> 2. HH-I-1972/1 Insulation Board, Thermal, Polyurethane or Polyisocyanurate, Faced with <br /> Aluminum Foil On one side. <br /> 3. TT-S-001657 Sealing Compound Single Component, Butyl Rubber Based, Solvent Release <br /> Type (For Buildings and other Types of Construction). <br /> 1.04 SUBMITTALS <br /> A. In accordance with the procedures and requirements set forth in Section 01300 - Submittals, <br /> submit the following: <br /> 1. Manufacturer's literature, specifications, installation instructions, technical data, and general <br /> recommendations. <br /> 2. Samples of each type of insulation specified. <br /> 1.05 DELIVERY, STORAGE AND HANDLING <br /> A. Deliver materials in unopened, undamaged original packaging with bearing the <br /> manufacturer's name. <br /> B. Store materials in clean, dry, protected areas. Do not leave materials exposed to the <br /> weather or sunlight, except to the extent necessary to perform the work. <br /> 022212BR <br /> 30048-005: 5/30/2012 07210-2 North Olmsted Phase 2 <br /> C. Protect against ignition. <br /> PART 2 -- PRODUCTS <br /> 2.01 ACCEPTABLE MANUFACTURERS <br /> A. Subject to compliance with the requirements, provide products as manufactured by the <br /> following: <br /> 1. Manufacturers of Extruded Polystyrene Board Insulation <br /> a. Amoco Foam Products Company <br /> b. Dow Chemical U.S.A. <br /> c. UC Industries <br /> 2. Manufacturers of Polyisocyanurate Foam Insulation <br /> a. Apache Products Company. <br /> b. Atlas Energy Products. <br /> c. The Celotex Corporation. <br /> 3. Manufacturers of Sprayed Polyurethane Foam: <br /> a. Demilec LLC <br /> b. BASF <br />