Laserfiche WebLink
4.3 Project Description <br />A: SPECIFIC LOCATION (Supply a written location description that includes the project termini; a <br />map does not replace this requirement.) 500 character limit. <br />The proposed improvements on Butternut Ridge Rd will extend from Revere Road to Great Northern Blvd <br />(S.R. 252). See attached Exhibit 2 - Area Map. <br />B: PROJECT COMPONENTS (Describe the specific work to be completed; the engineer's estimate <br />does not replace this requirement) 1,000 character limit. <br />The project includes planing 3-6 inches of existing asphalt concrete wearing course, repair and/or <br />recycling/reclamation of existing pavement base, increasing lane width and paved shoulder by <br />2-3 feet on each side, construction of uniform 3 -inch asphalt concrete overlay, replacement of <br />various deteriorated or non-functioning drainage pipes and structures, adjustment or <br />reconstruction of utility structures and castings, roadside restoration, and other related items as <br />shown on the plans. <br />C: PHYSICAL DIMENSIONS (Describe the physical dimensions of the existing facility and the <br />proposed facility. Include length, width, quantity and sizes, mgd capacity, etc in detail.) 500 <br />character limit. <br />The 2 -lane road is about 1 mile long, 20 ft wide, and is uncurbed with no paved shoulder. The <br />left -turn lane for WB traffic at Fitch Road provides a stacking distance of only 62 ft. The proposed <br />improvements will widen the pavement by 2-3 ft on each side to provide 11-12 ft lane widths and <br />a paved shoulder to better comply with ODOT recommendations. Also, the left -turn lane stacking <br />distance at Fitch Road will be increased to better conform with County requirements (see Exhibits <br />8-9). <br />Form OPWC0001 Rev. 8.11 Page 4 of 6 <br />