2023-085 Resolution - Laserfiche WebLink

Home Browse Search

2.3 Service Component Requirements Agile will install Customer Premises Equipment ("CPE") at the Customers) premises to provide Connect Services via an industry standard RJ45 10/100/1000 Ethernet port. 2.4 Access Unless otherwise provided for in the applicable Service Order, Customer, at its own expense, shall secure throughout the Service Term any easements, leases, licenses or other agreements necessary to allow Agile to use pathways into and in each building at which Customer's premises is located, to the Demarcation Point. Upon expiration or termination of the applicable Service Term, Customer shall grant Agile access to its premises as necessary to enable Agile to remove the Agile Equipment as defined in the Agreement. Agile, its employees, contractors and agents shall have access to any Agile Equipment or facilities at Customer's premises. Notwithstanding anything to the contrary herein, Agile shall have no liability for any delay or failure in its performance to the extent caused by any delay or failure of Customer (including, but not limited to, the failure to provide Agile prompt access) and/or caused by any notice or access restrictions or requirements. "Demarcation Point" shall mean the network interface point where Agile hands off the Service to Customer. The Demarcation Point delineates where responsibility for the Parties' respective networks, equipment and/ or maintenance obligations begin and end. Customer is responsible, at its sole cost and expense, for connecting to the Demarcation Point. 2.5 Power Supply An Uninterruptible Power Supply ("UPS") is not a standard component of the Service and is not included in the configuration or price. If the Customer desires power backup at a given site, It is Customers responsibility to provide the UPS mechanism. Agile is not responsible for outages due to power failures or interruptions at the Customer premises including, but not limited to, obligations and liabilities that would otherwise arise with respect to Network availability or Service Level metrics/credits. 3. Customer Options and Other Services 3.1 Low Bandwidth Device Connect Services The optional Low Bandwidth Device Connect Services provides the availability of custom low bandwidth device connections (below 3 Mbps) and are priced as described below for a month- to-month Service Term and a Standard Service GOS. The Low Bandwidth Connect Services are only available for device (e.g., oil well monitoring, road counter, video camera, etc.) connections and are not a substitute for the end-user bandwidths specified in Section 2.1 of this Service Attachment. 1. MRC per circuit: $60 2. Install Fee: $700 3. Comes with 1GB of data per month 4. Above 1GB priced at $.25 per 1 MB per month up to a maximum charge of $360 per month, including the $60 MRC 5. Data capped at 3GB per month 6. Upon reasonable notice to the Customer, a Low Bandwidth Connect Service can be terminated by Agile if the connected device is suspected of malfunctioning Agile Network Connect Service Attachment 10/1/19 Page 12