2025-021 Ordinance - Laserfiche WebLink

Home Browse Search

iii. Developments shall not be limited in the number of driveways accessed via an alley. iv. Individual developments or phases on the same or separate lots built as part of a larger, approved master development plan will have driveway access determined by measuring the street frontage of the master development plan. b. Driveway Location and Spacing. i. Driveways shall be located and designed in a manner that minimizes conflicts with both pedestrians and vehicular traffic. ii. All surface parking lots and structured parking shall be designed so that driveway access is off of a secondary street or alley, when such secondary street or alley can be accessed from the site. Driveway access to a parking lot may be achieved through an inter -parcel connection to a street or alley, with the approval of the Planning and Design Commission. iii. Driveways cannot be located within one hundred and fifty feet (150') from any intersection, as measured from the driveway center line to any intersection as shown in Q in Figure 1150.09(C), provided, however, that all developments are allowed at least one driveway. iv. Driveways cannot be located within two hundred and fifty feet (250') from any other existing or proposed driveway along the same street frontage as shown in Q in Figure 1150.09(C), provided, however, that all developments are allowed at least one driveway. V. Distances between driveways shall be measured along the right-of-way line from the center line of the proposed driveway at the right-of-way to the center line at the right-of-way of any other proposed or existing driveway. Design of Driveways. Driveway width shall be measured at the intersection of the public right- of-way, as shown in Q in Figure 1150.09(C). ii. Driveways shall be designed in accordance with the regulations outlined in Table 1150.09(D). JANUARY 24, 2025 27