Laserfiche WebLink
7. A permanent dimming system or other permanent controls may be used to reduce <br />the illumination level of any fixture in order to meet the required illumination <br />levels; however, in no case shall the dimming system or other control be permitted <br />to reduce the illumination level of any fixture more than 15% in order to meet the <br />required illumination levels during normal business hours. <br />Pedestrian and street lights shall be a minimum five (5) feet from any driveway and <br />shall not interfere with driver sight lines. <br />9. Pedestrian lights shall be a maximum of 14 feet in height. <br />10. Street lights shall be a maximum of 30 feet in height. <br />11. Street lights shall not be used as a primary means to light pedestrian areas and <br />should be focused to light public or private roadways. <br />12. Pedestrian and street lights may share a pole, however lights shall not be mounted <br />higher than permitted for each specific light type. <br />13. Pedestrian and street lights shall reflect the scale and character of proposed <br />buildings. The Planning and Design Commission my include guidance on the design <br />and appearance of new street and pedestrian lights in an adopted design manual per <br />Section 1150.07(C). <br />SECTION 1150.12 SIGNS. <br />A. Signage in the Mall Area Mixed Use Overlay District shall be permitted in accordance <br />with the provisions and regulations of Chapter 1163 Signs of this Zoning Code, except as <br />specifically modified in this section. <br />B. Additionally Permitted Signs. <br />In addition to those permitted in Section 1163.12 Sign Allowances, the following sign <br />types are permitted in the MAMU Overlay District. <br />a. Vertical Blade Sign. A tall, narrow, two-sided sign that is attached to and <br />projecting perpendicularly from the facade of a building. Vertical blade or signs <br />are intended to be viewed by pedestrians and motorists from a distance. <br />Standards. <br />(1) No portion of the sign may project above the roof -line of the facade <br />to which it is attached. <br />(2) Blade signs may be internally lit if the background is opaque and <br />the lettering is up to fifty percent (50%) of the surface area of the <br />sign. <br />(3) Channel letters and/or graphic elements may be backlit. <br />JANUARY 24, 2025 53 <br />