1976 024 Ordinance - Laserfiche WebLink

Home Browse Search

-10- registered engineer will not be required. 6.22 The subdivider shall submit the original drawing and 7 copies, together with any road profiles or other plans that may be required by the Board of Appeals. The plat shall be drawn to a scale of one inch equals 50 feet on sheets measuring 24" x 36" which corresponds to local plat book dimensions. When more than one sheet is required, an index sheet o£ the same size shall be filed showing the entire subdivision. When a plat has been approved by the Board of Appeals, one copy will be returned to the subdivider, with the approval of the Board of Appeals certified thereon, for filing with the Recorder of Cuyahoga County as the official plat of record. The original tracing will be returned to the subdivider for his records, one copy retained in the files of the Board of Appeals. 6.23 The Board o£ Appeals shall approve or disapprove this final plat within 30 days after its submission. Failure of the Board of Appeals to act on this final plat within these 30 days shall be deemed approval of it. If the plat is disapproved, the grounds for disapproval shall be supplied in writing to the subdivider and included in the records of the Board of Appeals. 6.24 Approval of the final plat by the Board o£ Appeals shall not con- stitute the acceptance by the public o£ the dedication of any roads, drainage ways, floodways, public way or other ground unless the Board o£ Appeals specifically agrees to such acceptance. 6.25 The final plat shall show: (a) All information required on the preliminary plat including, but not limited to, regional flood elevations, boundaries of flood-prone areas, building sites (including waste disposal areas for flood-prone lands), fills, flood or erosion protective works, and areas subject to special deed restrictions. (b) Flood plain and floodway areas determined by the Board of Appeals pursuant to Section 6.12. (c) Suf£icient data to determine readily and reproduce on the ground the location, bearing and length of every road line, boundary line,block line and building line whether curved or straight. (d) All dimensions to the nearest one hundredth (100th) of a foot and angles to the nearest minute. ' (e) Location and description of monuments. (£) Final plan of any sanitary sewers with grade, pipe sizes, and points of discharge. (g) Final plan of drainage systems with grade, pipe sizes, and location o£ outlet.