2001-096 Resolution - Laserfiche WebLink

Home Browse Search

Spf;C1f1Cat10I1S Bidder Complies Yes No ENGINE COMPARTMENT LIGHT An engine compartment liEht sha11 be installed under the engine hood, of which the switch is an integral part. Light shall have a.125" diameter deep hole in its lens to prevent moisture retenti on. CAB INTERIOR LIGHTING Auxiliary Iights shall be provided in the cab and consisting of: - Two (2) Weldon, Model 8081-6978-68, Red/Clear doine light located, one (1) on the officer side and one (1) on the driver side, controlled by the following: Clear forward iiaht controlled by the door switch and the lens switch. Red rearward light controlled by the leils switch. - Two (2) Adjustable Map Lights: With switches inounted on the cab ceiling - A Coiu-tesy Light at Each Door Opening: Controlled by automatic door switches. CREW CAB INTERIOR LIGIITING Auxiliary Iights shall be provided in the crew cab and cozisist of: - Four (4) Weldon, Model 8081-6978-68, RedJClear dome lights located two (2) each side, controlled by the following: Clear forward lights controlled by the door switch and the lens switch. Red rearward liahts controlled b_y the lens switch. - A courtesy light at each door opening, controlled by automatic door switches CAB HEATER There shall be a 40,000 BTL` heater in the cab located below the riaht side cab dash. The 1leateridefroster ventilation sha11 be built into the design of t11e cab dash insti-ument panel. ? The heater ducts shall be vented in a manner to provide heat directed towards the officer and the dnver. The defroster ducts shall be designed to provide maximum defrosting capabilities for the front cab windows. - Heater defroster coutrols shall be located on the cab dash within easv reach of the driver. CREVV CAS HEATER An auxiliary heater with 50,000 BTL' shall be provided inside the crew cab. The heater shall have a three (3) speed blower, and temperature controls located adjacent to the heater. Heater shall be mounted in seat riser. Page 24