2001-096 Resolution - Laserfiche WebLink

Home Browse Search

Specifications 1) Documentation of the electrical system performance tests. .2) A written load analysis. which shall include the following: A} The nameplate rating of tlie altenzator. B) The alternator rating under the conditions specified per: NFPA 1901 1999 Edition, section 11-3.2. C) The minimum continuous load of each component that is specified per: NFPA 1901 1999 Edition, section 11-3.2. D) Additional laads that, when added to the minimum continuous load; detei-mine the total connected load. E) Each individual inteimittent load. All of the above Iisted iteins shall be provided by the bidder per the following: NFPA 1901 1999 Edition, section 11-15. EXTERIOR LIGHTING Front headlights shall be halogen type, rectangular shaped, quad style mounted in a clu-orne and poIished aluminum housing. LED's Seven (?) LED ciearance and marker lights shall be installed across the leading edge of the cab. LED DIRECTIONAL (Ft•ont) Fi-ont turn si-nals to be Whelen, Model 640CLTAR, amber LED lights. Each Iight shall be mounted to the apparatus by a Whelen, 6EFLANGE, optional flange kit. The tunz siLnals shall be located below the headliahts. In addition to the front facing directional, a K•D Lamp Company, ?Vlodel 856-31055, marker,!turn indicator shall be provided on each side of the cab. - LED LIGHTS, FRONT ZONE LOWER Two (?) pair of Whelen, Model 64, red LED with self-contained flasher warning lights shall be installed on the cab face above the headlights. Both shall be mounted in a common bezel matching the one for the headlamps. The inboard li4hts shall be used as in addition to 1901 NFPA requirements. The outboard lights shall be used to meet the 1901 ?N'FPA requirements. One (1) switch shall be provided in the cab instrument panel to activate the LED lights. BACK-UP ALARM Bidder Complies Yes I No Page 3-33