Laserfiche WebLink
Specifications <br />pane1. A rubber coupling shall be included in this line to prevent damage from vibration or <br />chassis flexinQ. <br />A check valve sha11 be provided in the tan: to pump supply Iine to pi-event the possibility of <br />"back fillii7g" the water tank. <br />TANIi IZEFII,L <br />A 1.50" combination tank refill and pump bypass line shall be provided; usinQ a quarter-turn <br />ful.l flow ball valve coiltrolled from the pump operator's panel. ? <br />DISCHARGE OUT'LETS (Left Side) <br />There shall be one (1) discharge outlet with a?.50" valee on the Ieft side of the apparatus, <br />terminating ??ith a male 2.50" National Standard l?ose thread adapter. <br />DISCHARGE OLTTLETS (Right Side) <br />There shall be one (1) discharge outlet 2.50" valve on the right side of the apparatus; <br />tenninatin2 with a male 2.50" National Standard hose thread adapter. <br />DISCH ARGE OUTLET 3.50" <br />There shall be a 3.50" dischar2e outlet with a 3.50" Akron S1o-Cloz valve with a 3.00" ball, <br />installed on the right side of the apparatus below the 2.50" discharge, termulating with male a <br />3.50" National Standard hose thread adapter. This discharae outlet shall be actuated with a <br />lever coiztrol at the pump operator's control panel. <br />DISCFIARGE OUTLET (Front) <br />There shall be an 1.50" gated discnarge outlet, with a swivel, piped to the driner`s side on top <br />of the front bumper extension. <br />PluinbinQ shall consist of 2.00" piping and flexibie 11ose according to the desicn requirements <br />of the chassis. A fabricated weldnlent made of black iron pipe shall ve used in the plumbing <br />where appropriate. A 2.00" full flov, ball valve controlled at the puinp operator's panel shall <br />be used in the outlet plumbina. Automatic drains shall be provided at all low points of pipina. <br />DISCHARGE OliTi,ET (Rear) <br />There shall be one (1) discharge outlet piped to th-, rear of the hose bed, on the driver's side. <br />installed so proper clearance is provided for spanner wrencll or adapter. Plumbin!? shall_ <br />consist of 2.50" piping along with a 2.50" full flow ball valve with the control from the pump - <br />operator's panel. <br />DISCHARGE CAPS <br />Chrome plated, rocker lug, caps with chains shall be furnished for all side discharge outlets. <br />OL"TLET BLEEDERS <br />A.75", quarter turn type, bleeder valve shall be pravided for each outlet 1.50" or larger except <br />the deluge and the front bumper discharge (if equipped). The deluge and the front bumper <br />discharge (if equipped) shall have an automatic drain valve. <br />Bidder <br />Complies <br />Yes I 'No <br />Page 51