Laserfiche WebLink
Specifieations <br />mounting base and a portable base with two (2) clappered 2.5" inlets with special thread. <br />The monitor shall be painted to match the bodv. <br />CROSSLAY HOSE BEDS 1 50" <br />Two (2) crosslavs with 1.50" outlets sllall be provided. Each bed to be capable of cai-rvina <br />250 ft 1.75" DJ and shall be plumbed with 2.00" i.d. pipe and gated ??ith a 2.00" guarter turn <br />ball valve. <br />Outlets to be equipped with a 1.50" National Standard hose thread 90 dearee swivel located in <br />the hose bed so that hose may be removed from either side of apparatus. ? <br />The crossla_y controls shall be at the pump operator's panel. <br />The center crosslay dividers shall be fabricated of .25" aluminum and shall provide some <br />adjustment from side to side. <br />Vei-tical scuffplates; coi.structed of stainless steel, shall be provided at the fi-ont and z-ea?- eilds <br />of the bed on each side of vehicle. <br />Crosslav bed flooring shall consist of removable perforated brushed aluminum. <br />FOAM SYSTEM <br />An Alcron, rnodel 3096, foanl eductor, with a capacity for 95 gpm, shall be installed on the <br />discharae side of the pump. Foam eductor shall have a hall-type checl: valve to prevent water <br />flow back into the foam azent line. Foam eductor snall Izave a quarter-turn ba1l valve, for <br />altez-nation between the bypass and the eductor. An Akron, model 312S. auxiliar}, pick-up <br />tube shall be included with the svstem. <br />Controls for the foam system sI1a11 be located on the pump operator's panel and labeled with <br />red taas for easy identification. The controls for the eductor. foam supply. toam inlet, and the <br />flush shall be electric over pneuinatic to allo'kv for an eraonomically desiQned contl-ol panel <br />and sii2lplified operation. ? <br />Provided with the svstein shall be an instruetion plate and plumbin? schematic. <br />Push/pu11 handles for the foam svstem shall be labeled with red tatrs for easv identification. <br />All piping coming in direct contact with the foam concentrate sha11 be iminune to the <br />concentrate, so deterioration of the plumbing shall be avoided. <br />This svstem shall have a bypass eductor type foain, with a rated capacity of 95 gpm at .25% <br />11/', 3%, arld 6%. <br />Foam system operational considerations: 200 psi eductor inlet pressure shall be required for <br />73idder <br />Complies <br />I'es I No <br />Page 53