64-095 Ordinance - Laserfiche WebLink

Home Browse Search

CITY OF NORTH OLMSTED ORDINANCE NO. 64-~~ Page 3 3. Dimensions shall be expressed in feet and decimal parts thereof to the closest hundreth of a foot. Angles shall be expressed in degrees, minutes and seconds to the closest second. 4. The plat shall be complete and consistent in itself as to all measure- ments. Bearings shall be assumed to show angles. 5. The plat shall show north arrow, date, name and address of owner surveyor and developer. 6. The plat shall show acceptance and dedication clhuse and approvals by City officials for record purposes only. Approval clauses for Director of Law, City Engineers, Director of Public Service and Safety, Planning Commission and Council shall be prvided on the plat. 7. Monuments shall be shown on the plat at all angles in the outline of the subdivision and at all intersections of streets within the subdivi- sion outline of other streets and at all points of curvature. These monuments shall be set in the field at all points indicated on the subdivision plat before. the plat is approved for record purposes except monuments in areas to be paved. Monumentsi in areas to be paved shall be set during or immediately after the pavement is constructed and before the plat is accepted finally by the City. Municipal, County, section lines, original lot lines and other survey control lines shall be accurately tied to lines of the subdivision. 8. Streets in the subdivision shall be given names different from existing street names within the City of North Olmsted, and shall be checked with North Olmsted Post Office to prevent area duplication of names . 9. Building setback lines shall be shown on the plat. 10. Property adjacent to the subdivision shall show the owner's names and either the volume and page of his deed or the County Auditor's Permanent-Parcel rNumber. 11. Existing streets terminating near the subdivision boundary shall be shown. 12. Easements for utilities and drainage shall be shown naming the utilities. The City Engineersshall approve the width and location of the easement. 1 ~ . Streets: a. Minimum right-of-way width shall be sixty (60) feet, whether streets are intersecting streets or periphery streets abutting lands adjacent to area to be subdivided. b. No reserve strips abutting streets are permitted. c. Location of streets shall conform with the City of North Olmsted's General Plan. Turnout radius at the intersection of right-of-way lines shall be a minimum of 25 feet. d. Street intersections shall be at 90° where practicable, however, never less than 600. The maximum length of a street between intersections shall be 1500 feet. No street centerline shall intersect a thoroughfare less than 125 feet from another street centerline on either side of the thoroughfare unless recommended '~' by Planning Commission and approved by Council. ~~" e. If possible, streets shall be continuous. If a continuous street cannot be fitted into the overall street plan, a cul-de-sac street is permitted whose length. is less than 500 feet and whose t~r~rrin- ating diameter is at least 120 feet. f. Design criteria governing profile grades, horizontal curves and cross sections shall be of sound engineering practice subject to modification by the City Engineer. 14 . Sublots . a. All sub~ots shall front on a public street. b . The minimum frontage shall be determined at the right-of-way line or the building setback line whichever requires the larger lot Mime.