Laserfiche WebLink
t- Be plama N _ t DI 1 U_ i 1 <br />1.01 SCOPE OF WORK: <br />A. WORK INCLUDED: The Contractor shall furnish all necessary labor, <br />materials, equipment and services to furnish and erect pre-engineered metal <br />buildings as indicated on the drawings and described herein. Work under this <br />Section includes but is not necessarily limited to the following: <br />1. Pre-engineered structural framework (rigid frames and portal frames). <br />2. Wall framing and girts. <br />3. Roof framing and purlins. <br />4. Exterior roof panels. <br />5. Exterior metal wall panels. <br />6. Gutters and downspouts at pre-engineered metal building. <br />7. Standard accessories and trim for pre-engineered metal buildings <br />including eave trim, ridge trim, door trim, corner trim, etc. <br />8. Prefabricated pipe flashings around mechanical pipes and flues. <br />9. 3/4" Thermal spacing blocks at roof purlins. <br />B. RELATED WORK SPECIFIED ELSEWHERE: <br />1. Concrete Slabs and Foundations <br />2. Reinforcing Steel <br />3. Caulking <br />1.02 APPLICABLE CODES AND STANDARDS: <br />A. CODES: All work specified under this Section shall comply with the following <br />codes: <br />1. Ohio Building Code. <br />2. Local codes. <br />3. "Structural Welding Code - Steel", AWS D1.1 - 2015 of the American <br />Welding Society (AWS). <br />B. OSHA: All work specified under this Section shall comply with applicable <br />requirements of the William -Steiger Occupational Safety and Health Act. <br />2012.01 <br />