My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2016-062 Resolution
Document-Host
>
City North Olmsted
>
Legislation
>
2016
>
2016-062 Resolution
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/14/2017 10:45:03 AM
Creation date
6/23/2016 5:30:18 PM
Metadata
Fields
Template:
North Olmsted Legislation
Legislation Number
2016-062
Legislation Date
6/21/2016
Year
2016
Legislation Title
Bids Roof Replacement WWTP Building No. 14
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
23
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
PART 2 -- MATERIALS <br />2.01 MATERIALS <br />A. Metal Flashing <br />1. Exposed to View: Provide prefinished 0.050 inches aluminum. Finish shall be fullstrength <br />Kynar 500 baked -on paint finish with a 20 year warranty. <br />2. Concealed from View: Provide a minimum of 22 ga. galvanized steel sheet, <br />stainless steel sheet, or mill -finished aluminum sheet. <br />B. Nails, screws, rivets, bolts and other fasteners: same material as sheet metal being <br />attached. Nails shall be 18 gauge diameter shank, 1/4 inch diameter flat head, annularthread, <br />diamond point, long enough to penetrate backing by at least 1 inch. Nails shall be <br />spaced 3 inches on center unless other spacing is indicated. Exposed fasteners shallmatch <br />finish of metal being fastened. <br />C. Reglets shall be formed of 300 series stainless steel, minimum of 0.020 inch. Reglets shall <br />be Model CO for insertion in concrete, MA -4 for insertion in masonry as manufactured by <br />FRY Reglet Corporation. Corners shall be factory made, mitered and sealed. Furnish <br />reglets to proper trade in sufficient time to be incorporated into the masonry or concrete <br />work. <br />D. Plastic cement shall conform to ASTM D2822. <br />E. Sealants shall be silicone type. <br />F. Sealer tape shall be polyisobutylene tape specifically manufactured for setting flanges on <br />bituminous roofing such as Morrison and Company CL -50. <br />PART 3 -- EXECUTION <br />3.01 FABRICATION <br />A. Shop fabricateWork to greatest extent possible. Comply with details shown and applicable <br />requirements of SMACNA "Architectural SheetMetalManual" and other recognized industry <br />standards. Fabricate for waterproof and weather resistant performance; with expansion <br />provisions for running work, sufficient to permanently prevent leakage, and damage or <br />deterioration of the work. Comply with material manufacturer's instructions and <br />30048-005: 5/30/2012 07600-3 North Olmsted Phase 2 <br />recommendations for forming material. Form exposed work without excessive oil -canning, <br />buckling and toolmarks, true to line and levels as indicated, with exposed edges folded back <br />to form hems. <br />B. Roof penetration sheet metal work shall be provided and coordinated with the roofing <br />system. The design and details shall conform to SMACNA "Architectural Sheet Metal <br />Manual". Sheet metal items shall be built into roofing in strict accordance with the <br />instructions of the roofing manufacturer. <br />- END OF SECTION — <br />SECTION 07700 <br />ROOF SPECIALTIES AND ACCESSORIES <br />PART 1 -- GENERAL <br />1.01 THE REQUIREMENT <br />A. Furnish all labor, materials, equipment and appliances required for the complete execution <br />of Work shown on Drawings and specified herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 06100 — Rough Carpentry <br />B. Section 07510 — Built-up Bituminous Roofing <br />
The URL can be used to link to this page
Your browser does not support the video tag.